Square Carbide End Mill NDN (standard length)
Carbide, 4 flute square end mill series in 18 sizes, each with its own order code. Cutting diameter 1 – 20 mm, shank diameter 4 – 20 mm, overall length 50 – 92 mm. Prices $13.65 – $309.40.
Price range by size
$13.65 – $309.40
- Same-day dispatch for orders before 15:00
- Genuine product, invoiced sale
Technical data
- D1 Range
- 1 – 20 mm
- D2 Range
- 4 – 20 mm
- Ağız Sayısı
- 4
- Uç Geometrisi
- Düz (square)
- L1 Range
- 3 – 38 mm
- L Range
- 50 – 92 mm
- Malzeme
- Karbür
Sizes and prices
Each row is a separate order code; the selected size is added straight to the cart.
Meaning of the dimension codes
- D1 :
- Cutting diameter
- D2 :
- Shank diameter
- L1 :
- Flute length
- L :
- Overall length
- R :
- Corner radius
- Z :
- Number of flutes
18 sizes
| Order code | D1(mm) | D2(mm) | L1(mm) | L(mm) | Z | Price | Stock | Qty | Action |
|---|---|---|---|---|---|---|---|---|---|
| FZ.NDN0104 | Ø1 | Ø4 | 3 | 50 | 4 | $13.65 | On order | Quote request | |
| FZ.NDN0154 | Ø1,5 | Ø4 | 4 | 50 | 4 | $13.65 | On order | Quote request | |
| FZ.NDN0204 | Ø2 | Ø4 | 6 | 50 | 4 | $13.65 | On order | Quote request | |
| FZ.NDN0254 | Ø2,5 | Ø4 | 8 | 50 | 4 | $13.65 | On order | Quote request | |
| FZ.NDN0304 | Ø3 | Ø4 | 8 | 50 | 4 | $13.65 | On order | Quote request | |
| FZ.NDN0404 | Ø4 | Ø4 | 11 | 50 | 4 | $13.65 | On order | Quote request | |
| FZ.NDN0504 | Ø5 | Ø5 | 15 | 50 | 4 | $16.69 | On order | Quote request | |
| FZ.NDN0604 | Ø6 | Ø6 | 16 | 57 | 4 | $22.75 | On order | Quote request | |
| FZ.NDN0704 | Ø7 | Ø8 | 20 | 60 | 4 | $37.91 | On order | Quote request | |
| FZ.NDN0804 | Ø8 | Ø8 | 20 | 60 | 4 | $37.91 | On order | Quote request | |
| FZ.NDN0904 | Ø9 | Ø10 | 20 | 72 | 4 | $63.70 | On order | Quote request | |
| FZ.NDN1004 | Ø10 | Ø10 | 25 | 72 | 4 | $63.70 | On order | Quote request | |
| FZ.NDN1104 | Ø11 | Ø12 | 30 | 75 | 4 | $92.51 | On order | Quote request | |
| FZ.NDN1204 | Ø12 | Ø12 | 30 | 75 | 4 | $92.51 | On order | Quote request | |
| FZ.NDN1404 | Ø14 | Ø14 | 32 | 83 | 4 | $121.34 | On order | Quote request | |
| FZ.NDN1604 | Ø16 | Ø16 | 32 | 92 | 4 | $174.41 | On order | Quote request | |
| FZ.NDN1804 | Ø18 | Ø18 | 32 | 92 | 4 | $248.74 | On order | Quote request | |
| FZ.NDN2004 | Ø20 | Ø20 | 38 | 92 | 4 | $309.40 | On order | Quote request |
Product description
Square Carbide End Mill NDN (standard length) is a square end mill series used for slotting, pocketing and surfaces that require a sharp corner. A carbide body allows a higher cutting speed and a longer tool life than an HSS tool.
This family contains 18 sizes; the cutting diameter spans 1 – 20 mm, the shank diameter 4 – 20 mm, the flute length 3 – 38 mm, the overall length 50 – 92 mm. The price range is $13.65 – $309.40 (excl. VAT).
Choosing within the family: Within the same geometry this series offers the widest choice of sizes (18 sizes).
Application note: A square end leaves a sharp corner, and that corner is the weakest point of the cutting edge. Where the design does not require a sharp corner, a corner radius tool lasts noticeably longer.
Every order code in the table below can be added straight to the cart. The meaning of the column abbreviations is explained in the dimension code guide. Spindle speed and feed can be worked out with the cutting parameter calculator.
Frequently asked questions
Which sizes does the NDN series cover?
This family contains 18 sizes; the cutting diameter spans 1 – 20 mm. The full list is in the table above; every row is a separate order code and can be added straight to the cart.
Is D1 or D2 the relevant dimension when ordering?
Both are considered together. D1 is the cutting diameter and sets the width of the slot to be cut. D2 is the shank diameter and states what the holder or collet has to grip. On small diameter cutters the shank is usually thicker than the cutting diameter, so the row whose D2 matches the available collet is chosen.
Is this 4 flute tool suitable for full slotting?
On a 4 flute tool the chip gullet is narrow; in full slotting (ae = D1) the gullet can pack and break the tool. A 2–3 flute tool or a trochoidal strategy (ae ≤ 0.1 × D) is preferred for full slots.
How long does delivery take when an item is not in stock?
For sizes shown as "On order" the delivery time is confirmed with the order. Urgent requirements can be raised through the quote form or via WhatsApp.
Related Technical Guides
For choosing the right tool and working with the right parameters
Surface Roughness (Ra, Rz) and Finish Milling: Theoretical Calculation, Stepover Selection and Measurement
What Ra, Rz and Rmax actually measure, the changes brought by the ISO 21920 series, theoretical roughness calculated from nose radius and feed, scallop height and stepover selection in ball nose milling, and the cut-off rules.
13 min read
Trochoidal Milling and High Efficiency Machining (HEM/HSM): Engagement Angle, Parameters and MRR Calculation
The low radial, high axial engagement principle; engagement angle and chip thinning correction, material removal rate compared against full slotting, CAM naming conventions and machine tool requirements.
11 min read
Milling Titanium and Heat-Resistant Alloys (ISO S): Parameters, Cooling and Safety
In ISO S materials such as Ti-6Al-4V and Inconel 718, heat builds up on the cutting edge instead of leaving with the chip. Cutting speed limits, high-pressure coolant, trochoidal engagement control, notch wear and the risk of chip fire are covered together.
11 min read
